CNC & Pfarrer Co-Production
P2 Rotary Tattoo Machine
This P2 rotary tattoo machine has a wealth of adjustment functions to meet the needs of different tattoo styles. 3.5 mm and 3.7 mm stroke applied to various types of a tattoo can be sliced and achieve atomization, and adjustment is simple. What makes the P2 rotary tattoo machine unique is that – it can adjust the needle soft-hard of the needle strike recoil.
CNC P2 Rotary Tattoo Machine Structure
The CNC P2 offers a polished and anodized grip, safe to be sterilized under steam, in an autoclave or sprayed with cold sanitation solutions.
The Body is the core of the machine where the reciprocating and give system are housed. This module should be sanitized by wiping it with cold sterilization solutions only.
This detachable module houses the motor, cam and RCA connection. Once removed, artists can replace stroke length by swapping the included stroke wheels.
CNC P2 Rotary Tattoo Machine -
Adjustment of Needle Strike Recoil
This dial, located at the tip of the body, adjusts your needle strike from hard to soft. This is achieved by turning the give dial to increase the needle recoil, as shown in the red arrow’s direction.
Interchangeable Cam Wheels
3.5mm and 3.7mm stroke wheels are included in the package.
The stroke wheel is simply changed by loosening the securing grub screw. Make sure that the grub screw is tightened before starting the machine again.
Stop the machine immediately if there is any abnormal noise after starting the machine. If you still can’t solve the problem, please contact our customer service team.
OF CNC P2 Rotary TATOO Machine
Operating Mode: continuous operation
Dimensions: 117mm φ27mm
Drive: Japan coreless motor
Piercing Frequency: 50Hz-170Hz
Rated Voltage: 12V
Needle Protrusion : 0-4mm
Vibration Total Value: ≤2.5m2/s
Emission Sound Pressure Level: ≤68Db(A)