CNC® Tattoo Pen Machine New Program Faulhaber Q2


Q2 tattoo pen limited version is available now


A short and portable tattoo pen machine with all its working parts integrated into the grip. The Q2 is the perfect machine for modern tattooing because it’s lighter and it has minimal vibration, allowing you to focus on the needle tip. It can draw delicate lines and it can also create perfect shading.

By quickly and easily changing the internal cam and pin, the stroke on the CNC Q2 can be adjusted. This gives you the flexibility and ‘hit’ to use the same machine for bold lines, solid color, or smooth black and grey.

Our blog “How to pick the right stroke length” will give you an idea of how to choose the right stroke for the piece.

Key Features

  • Professional direct drive machine.
  • Lightweight design, classic appearance.
  • Faulhaber nominal 7.5V advanced DC-motor.
  • The recommended operating voltage is 6V-8V. We strongly recommend the working voltage should be kept below 10V. Using higher voltage is not recommended.
  • The RCA connection supports both wired and wireless power.
  • Accepts all major cartridge brands. (We do not recommend using hard silicone cartridges).
  • Grip diameter 30mm.
  • Length: 95mm.
  • Light design, only 108g.
  • RCA connection.
  • The eccentric cam and pin be replaced.


  •  1 Machine
  • 1 RCA Cord
  •  a few O-ring.

Welcome to CNC® Official Store. Since 2018, CNC® Tattoo Supply R&D Team launched a series of professional tattoo machines and gain huge success and reputation.  Quality and Service are always the most important principle that we always follow.  

We truly believe CNC® Tattoo Supply is making the most innovative products in the world.

If you don’t have a positive experience for ANY reason, we will do WHATEVER it takes to make sure you are 100% satisfied with your purchase.

We provide 1 Year long warranty service for all your machines purchased from CNC Tattoo Supply.

CNC® has an excellent technical and after-sales service team, so when you have any questions, concerns, or need recommendations on any product, you can always contact us! This can be done from the Contact us Page form, Support email([email protected]), or you can reach out to us on social media (Facebook, Twitter, IG, etc).

You can contact us 24/7 and we normally respond within a few hours and usually no later than 24 hrs.

CNC® Tattoo Supply has overseas warehousing centers around the world to ensure that you receive your shipment as soon as possible. The biggest warehouses are mainly in the US and Europe and are currently fully stocked, so you can place your order with confidence.

We work with the world’s leading courier companies to ensure that our customers receive their deliveries quickly and safely.

(When your ordered products in our warehouses are out of stock, we will ship directly from the country of origin. Usually, we choose DHL, UPS, and FedEx. Normally delivery time will be within 7 days to the US and most European countries)
Generally, we need 24 – 48 hours to process your order, please keep your phone/email open so that we can contact you in case of any other situation (if there’s).

For the more detailed shipping policy, please refer to our Shipping Policy Page.

When you are not satisfied with any product or purchase error, CNC fully supports the return of the product and will process the refund at the first time, please click here to view our return details.

Want a discount? Become a member!

CNC Q Series
Higher Professional Standards

This Q2 tattoo machine uses the German Faulhaber flat motor. The Q2 Short cartridge pen accepts almost brands of needle cartridges and power supplies on the market. Weighing only 110 grams and being only 95 mm long, the Q2 looks more like a light and comfortable grip. This makes it easier to control and create exquisite tattoos. It can be used with a wireless battery taking the operation to a new level. Our engineers have put the center of gravity towards the front of the machine allowing greater control for the tattoo artist. This extremely quiet machine will will help new clients have a better tattoo experience. It’s a great choice for any style of tattoo.

Light weight Design

110 grams only, forward-weight, aiding the artist with downward needle pressure.

Short pen design

95mm length. Free up your creative space to the fullest. Comfortable grip helps especially when long working hours are required.

cnc q2 rotary tattoo short pen

Faulhaber Drive

High level of precision and power in the Faulhaber Micromotor makes CNC Q2 perform excellent at lining and color packing.

low vibration

The drive structure is optimized by the professional CNC design team, combined with high-performance motors, thus significantly reducing vibration and noise.

of CNC Q2 Short Tattoo Machine

Operating Mode: continuous operation

Dimensions: 95mm φ30mm

Weight: 108g

Connection: 3.5mm jack

Drive: Precision motor-DC

Piercing Frequency: 40Hz-160Hz

Rated Voltage: 7.5V (new program)

Power Intake: 2w

Stroke: 3.5mm

Needle Protrusion: 0-4mm

Vibration Total Value: ≤2.5m2/s

Emission Sound Pressure Level: ≤65Db(A)

CNC Q2 Short Tattoo Pen
Gallery Show

cnc q2 short tattoo machine display 1
cnc q2 short tattoo machine display 3
cnc q2 short tattoo machine display 2

CNC Q2 Unboxing & Review


Q2 New Versions Make You Tattoo Colorful

CNC® Q2 Tattoo Pen Lorna

CNC® Q2 Tattoo Pen Machine Lorna

cnc short tattoo machine q2 silver

CNC® Q2 Tattoo Pen Machine Terminator

Q2 Tattoo kits Make You Tattoo affordable

q2 tattoo machine kit with police cartridges

Best Selling CNC Q2 Tattoo Machine Kit

cnc tattoo machine pen kit

CNC® Q2 Tattoo Pen Professional Kit

CNC Q Family Tattoo Pen Comparison

CNC Q Family Tattoo Pen Comparison CNC q1 tattoo pen machine CNC Q1 CNC Q2 SHORT TATTOO GUN CNC Q2 cnc q3 tattoo pen red CNC Q3 CNC Q5 short tattoo pen main CNC Q5 CNC Q6 TATTOO MACHINE MAIN CNC Q6
MACHINE SPECS Shop Now Shop Now Shop Now Shop Now Shop Now
SPECIALIZATION Price $199.45 $209.95 $169.95 $169.95 $129.95
Type Direct Drive Direct Drive Direct Drive Direct Drive Direct Drive
Stroke Size 3.5mm
3.0mm or 4.0mm adjustable
3.0mm or 4.0mm adjustable
3.0mm or 4.0mm adjustable
3.0mm or 4.0mm adjustable
3.0mm or 4.0mm adjustable
Grip Size 31mm 30mm 32mm 34mm 34mm
Connectivity RCA cord or wireless battery RCA cord or wireless battery RCA cord or wireless battery RCA cord or wireless battery RCA cord or wireless battery
Needle Depth 0 - 4.0mm 0 - 4.0mm 0 - 4.0mm 0 - 4.0mm 0 - 4.0mm
Motor Faulhaber motor Faulhaber motor CNC customized Germany motor CNC customized Germany motor Germany coreless motor
Weight 110g 108g 123.6g 147g 153g
Capabilities All tattooing techniques All tattooing techniques All tattooing techniques All tattooing techniques, especially suitable for shading. All tattooing techniques
Body Tattoo


Weight 0.468 kg

Customer Reviews

Based on 43 reviews
Great value and wonderful

I bought this based on all the good reviews, found i love this for shading and packing color. Works every time and no issues.

Scott Clarence
Great introduction to tattooing

Overall I’m very happy with the product, I like the shape and the weight. I think I would prefer getting a battery that doesn’t hang over the side, sometimes I feel I’m getting pulled by the weight of the battery, but this I think is something I will need to get used to especially if I start using coils as well. The only con I have is that it won’t start and stop and start again on a low voltage or a longer needle setting, this means I have to fiddle with the settings wile it is on and is a bit fiddly and distracting when the machine is wrapped up.

Orth Jones
Q2 a legit tattoo pen

love this Q2 machine. I am a complete novice but thanks to the Q2 pen I am able to transfer my years of illustration skills right to fake skins and even brave people. Thanks CNC you are the bomb

Alan Lemieux

This is my first CNC machine and it is amazing!
I've used it over a year and it rocks! No complaints!
Great choice!
I used this machine on all these tattoos!

Vincenzo Teodonno
Cnc Q2 è ottima

Macchina silenziosissima con vibrazioni assenti, leggerissima e comoda, ottima macchina 💪💣

Roderick Ycot
Tattoo pen Q2

This my resent made ,, by Q2 pen 4.00 mm ,hope you like it..stay safe all…

Steve Lor
Thumbs up

This cnc machine is a beast. It feels good in the hand, nice and quiet, and it doesn't vibrate heavily so it gives the user more control. I like this machine a lot.

Roderick Ycot
Q2 tattoo pen 4.0mm

Juzt show you guys my latest work by Q2 pen, 4.0mm , greetingz from Iceland/,, stay safe all..

Harry Wilson
Very good machine!

Liked it so I ended up getting 2. Got the 4mm can and the 3.5mm cam. Try both you won't be disappointed!

Anthony Peltonen
Perfect except…

Flawless body and finish I just wish it came with a different motor because I run mine around 10 volts for lining and 8.5 to 9 volts for color or shading and it does all beautifully. Just not sure how long the motor will last. As long as I can buy a replacement q2 when I need too! I will keep coming back. Smaller and lighter than the bishop wand also! Is definitely my new workhorse.

Shopping Cart
Scroll to Top