CNC® Tattoo Pen Machine New Program Faulhaber Q2


High-End Faulhaber Motor, Better Favorable Price for CNC® Q1


A short and portable tattoo pen machine with all its working parts integrated into the grip. The Q2 is the perfect machine for modern tattooing because it’s lighter and it has minimal vibration, allowing you to focus on the needle tip. It can draw delicate lines and it can also create perfect shading.

By quickly and easily changing the internal cam and pin, the stroke on the CNC Q2 can be adjusted. This gives you the flexibility and ‘hit’ to use the same machine for bold lines, solid color, or smooth black and grey.

Our blog “How to pick the right stroke length” will give you an idea of how to choose the right stroke for the piece.

Key Features

  • Professional direct drive machine.
  • Lightweight design, classic appearance.
  • Faulhaber nominal 7.5V advanced DC-motor.
  • The recommended operating voltage is 6V-8V. We strongly recommend the working voltage should be kept below 10V. Using higher voltage is not recommended.
  • The RCA connection supports both wired and wireless power.
  • Accepts all major cartridge brands. (We do not recommend using hard silicone cartridges).
  • Grip diameter 30mm.
  • Length: 95mm.
  • Light design, only 108g.
  • RCA connection.
  • The eccentric cam and pin be replaced.


  •  1 Machine
  • 1 RCA Cord
  •  a few O-ring.

Welcome to CNC® Official Store. Since 2018, CNC® Tattoo Supply R&D Team launched a series of professional tattoo machines and gain huge success and reputation. 

Quality and Service are always the most important principle that we always follow. 

We truly believe CNC® Tattoo Supply is making the most innovative products in the world.

If you don't have a positive experience for ANY reason, we will do WHATEVER it takes to make sure you are 100% satisfied with your purchase.

We provide 1 Year long warranty service for all your machines purchased from CNC Tattoo Supply.

CNC® has an excellent technical and after-sales service team, so when you have any questions, concerns, or need recommendations on any product, you can always contact us! This can be done from the Contact us Page form, Support email([email protected]), or you can reach out to us on social media (Facebook, Twitter, IG, etc).

You can contact us 24/7 and we normally respond within a few hours and usually no later than 24 hrs.

CNC® Tattoo Supply has overseas warehousing centers around the world to ensure that you receive your shipment as soon as possible. The biggest warehouses are mainly in the US and Europe and are currently fully stocked, so you can place your order with confidence.

We work with the world’s leading courier companies to ensure that our customers receive their deliveries quickly and safely.

(When your ordered products in our warehouses are out of stock, we will ship directly from the country of origin. Usually, we choose DHL, UPS, and FedEx. Normally delivery time will be within 7 days to the US and most European countries)
Generally, we need 24 - 48 hours to process your order, please keep your phone/email open so that we can contact you in case of any other situation (if there's).

For the more detailed shipping policy, please refer to our Shipping Policy Page.

Frequently Bought Together

cnc q2 tattoo machine + TC620 Tattoo Machine Bag Covers + TA625-35mm foam GRIP COVER + TA719 tattoo kit box + Tattoo Skin Practice +
Price for all: $264.91 Save $29.43

CNC Q Series
Higher Professional Standards

This Q2 tattoo machine uses the German Faulhaber flat motor. The Q2 Short cartridge pen accepts almost brands of needle cartridges and power supplies on the market. Weighing only 110 grams and being only 95 mm long, the Q2 looks more like a light and comfortable grip. This makes it easier to control and create exquisite tattoos. It can be used with a wireless battery taking the operation to a new level. Our engineers have put the center of gravity towards the front of the machine allowing greater control for the tattoo artist. This extremely quiet machine will will help new clients have a better tattoo experience. It’s a great choice for any style of tattoo.

Light weight Design

110 grams only, forward-weight, aiding the artist with downward needle pressure.

Short pen design

95mm length. Free up your creative space to the fullest. Comfortable grip helps especially when long working hours are required.

cnc q2 rotary tattoo short pen

Faulhaber Drive

High level of precision and power in the Faulhaber Micromotor makes CNC Q2 perform excellent at lining and color packing.

low vibration

The drive structure is optimized by the professional CNC design team, combined with high-performance motors, thus significantly reducing vibration and noise.

of CNC Q2 Short Tattoo Machine

Operating Mode: continuous operation

Dimensions: 95mm φ30mm

Weight: 108g

Connection: 3.5mm jack

Drive: Precision motor-DC

Piercing Frequency: 40Hz-160Hz

Rated Voltage: 7.5V (new program)

Power Intake: 2w

Stroke: 3.5mm

Needle Protrusion: 0-4mm

Vibration Total Value: ≤2.5m2/s

Emission Sound Pressure Level: ≤65Db(A)

CNC Q2 Short Tattoo Pen
Gallery Show

cnc q2 short tattoo machine display 1
cnc q2 short tattoo machine display 3
cnc q2 short tattoo machine display 2

CNC Q2 Unboxing & Review

Weight 0.468 kg

Customer Reviews

Based on 33 reviews
Ariel Coppola

Great machine! BUT I got one a couple months ago only have about 20 hours of wear on it and went to use it a couple days ago and I heard a rattling, the motor somehow got unstuck and dislodged from the back piece. I don’t know if the glue was cheap or maybe I got a broken one but It was unable to work after that. They told me to glue it back on -.-. Obviously this was a mistake on the company and I wasn’t offered a replacement. Very sad I loved it until then, maybe better to go with something more reliable.

Nate tattooist Stewart
This one does it all!!!

I picked up a Q2 after reading some reviews and watching some videos and I swear, it did not disappoint! I picked this one up for a couple hundred AFTER spending $800 on a wand packer and talk about regret! I wish I would've got the Q2 first bc it would have saved me merely $1000! The Q2 has unbelievable abilities! I've always had a reputation of being "light handed" but when I was using my wand packer, ppl definitely experienced much more discomfort than what they were used to! The Q2 has just the right amount of punch to pack color with ease and minor discomfort..and somehow also has the perfect amount of give that allows me to create the softest powder shade ever! I can create the smoothest transitions, taking the blackest black....blended out to a one drop wash...fading out to nothingness..quickly and so smoothly! I've used many many machines in my 14yrs of tattooing, but I've never used a machine that could do it all so well! I'd always have two or three machines set up when I'm doing large pieces.. different strokes different capabilities/specs etc. But with the Q2, all I have to do is swap carts and adjust voltage to suit.
I've always been more of a black and grey artist, but I try to be able to do it all well. Keeps me from getting bored, I guess. I can't believe I am able to do it all with this one machine! Effortlessly, too! I highly recommend the CNC Q2 for anyone/everyone BEFORE spending big bucks on popular name/brand! It's super, light, quiet with very little vibration! It's amazing how universal it is! It's also built extremely well! Super solid! I've had zero issues with it. There's not one thing about it that I would change.. nothing 🙌
I can't say enough good things about it! Thank you CNC for making this machine and also making it so affordable!! You definitely knocked it out of the park, CNC. Congratulations to you guys!
To anyone looking for a good Pen style tattoo machine, look no more!

Ana Lona
Great machine but cord not so much

The rca cord fit so loosely in my machine, the machine didn’t want to work at first til I figured out the cord was the problem, ended up having to order a new cord

Hi Lona, really sorry for the cord issue. Please contact the team at [email protected] to solve this problem for you.

Slobođanac Tomislav
Cnc Q2

As for the machine, the only complaint is that it loses contact with the battery often. Just tell me please what are the possible malfunctions on it and what I will have to change over time

Matt Hall
Great machine

Great machine. Well made, powerful for such a small package.

Roderick Ycot
Q2 PEN 3.5MM /Chang it with 4.0mm

Hello, guys,, just got my pen Q2,, 3.5mm,, but I change it to 4.0mm,, anyway work very good line it and shade, been tattooing many years,, just run it 8.5 or 8.7 for line ,, and 7.5 for shading,,, ( I use wireless battery ) but it’s tattoo artist deferent how they run there machine…feel free to ask me,, (IG) dondonpilipino_tattoo (FB) dondon Pilipino… stay safe all.. thanks…

Vincent Riservato
Quality machine! Sweet feel!

Love this tattoo pen! It has a great grip/feel while tattooing for hours. Easy twist adjusting for needle depth. Overall build and metals feels like it’s gonna last a longtime. Works great with the wireless RCA battery I picked up from them also. If you are looking for a starter /professional machine for a solid price this is it.

Macleay Sullivan
A review for those questioning a purchase

I’m writing this review to hopefully address some questions I had that I couldn’t really find the answers too online!
I recieved my Q2 this week and although it hasn’t been long I am beyond happy and know that it will last so well. First of all the team at CNC were beyond helpful with their support and shipping was quick (12 days to Australia) despite COVID shipping worries. I had my worries about the machine handling larger needle groups. With my last machine it would struggle to run a 9rl smoothly without super slow movement, the Q2 lines so well with a 9rl it honestly felt like a heaps smaller needle in my last machine. Keen to try bigger needles but I know already it will be so much better then my last machine. Also heard some talk of the machine needing lube so I bought some, but when I opened it up to oil it I found that it had been lubricated before it came, (CNC obviously listening and responding to feedback). Shading is as everyone reports I didn’t have any worries there, mainly as my style is thick line work. I am so beyond happy to finally have a good machine and setup with the battery pack (Which is good so far just need to get used to the weight and not having a peddle). I just want to add for those like me, it’s a fantastic machine I am just so glad I bought one I can’t recommend it enough it just feels amazing to tattoo with!

Kevin McCabe
Awesome machine!

Absolutely love this machine! It does everything I need it to do! I have machines from $50 to $900 and I’m actually using this machine exclusively now. Tattoos are coming out perfect! One pass, no problem, shading…not an issue!

Jorge Galvez
What i needed

I am just starting in this amazing art and I got one of those kits from other website, as a newbie I didnt realize how poor was my machine until I got my Q2. This machine is powerful , I used to run the other machine at 9v to even get a line but with the Q2 I just need to run at 6.5v to get a good line. I am still on the learning process but this machine is making everything easier. love this product.

Shopping Cart

there is a new Wireless Device in CNC


Be The First To Test It NOW!


there is a new Wireless Device in CNC


Be The First To Test It NOW!